Call Us Today! 1-800-251-7839

Cart (0)

You have no items in your shopping cart.

Print
Lee Alox Bullet Lube - 4 oz. zoom
  • Lee Alox Bullet Lube - 4 oz.
  • Lee Alox Bullet Lube - 4 oz.

Lee Alox Bullet Lube - 4 oz.

Product Number: LEE90177

Our Price: $4.99

Availability: In stock

Manufacturer

Lee

Details & Specs

Made from alox, hunters depend on the high quality of Lee Alox Bullet Lube - 4 oz. This lubrication coats the entire bullet using only a very fine film. Once dried, the film offers a soft finish that resembles varnish for adherence to the bullet.

The lube is extremely easy to apply, and for most cast bullets there is no need to size. Although this particular lubrication works great with all cast bullets, it is most efficient with micro-band bullets made for tumble lubing. For individuals who enjoy reloading at home, this is another important accessory.

Reviews
Lee Alox Bullet Lube - 4 oz. is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from A Lee Alox Bullet Lubricant solution After I resize cast lead bullets, I coat them with a Lee Liquid Alox Bullet Lubricant / mineral spirits solution prepared as follows: Mix one 4 oz. bottle of Lee Liquid Alox Bullet Lubricant and 28 oz. of odorless mineral spirits in a 32 oz. bottle. Shake the solution vigorously. If the solution has ‘clumps’, warm the mix, then shake it vigorously again. Repeat this process until the clumps dissolve. Pour the a few ounces of the solution into a pump spray bottle for use as needed. Before each use, shake the solution vigorously. Dissolve clumps and settled ‘stuff’ as previously described. Put a quantity of bullets in a container. Spray and hand tumble the bullets for a few seconds (or shake them gently in a sealed container), then spread them on a tray to dry. They should be ‘tack free’ at room temperature in about an hour, dry in about 4 hours, and ‘set’ in about 8 hours. To dry and set them faster, put the tray in a warm area where the air is moving. (Drying tip: To dry the bullets and set the Alox even more quickly, pour the coated bullets into a ‘transfer’ tray. Let the bullets drain for a few minutes, then pour them onto a drying tray and place it about two feet away from a small space heater on “Low” heat.) When the Alox is set, the bullets are ready for loading. One 32 oz. bottle of the Lee Liquid Alox Bullet Lubricant solution will coat thousands of bullets. The process is very quick and easy... with little mess. To clean up, simply wipe down the container and tray(s) with a paper towel and a small amount of mineral spirits. Note: To help prevent the spray head from clogging: Put about 1 oz. of mineral spirits in a small container (like a juice glass or baby food jar). Remove the spray head and cap the bottle. Put the free end of the spray head tube in the mineral spirits and spray a paper towel. Repeat, as necessary, until the spray is clear. Discard the paper towel. Wipe down the spray head and store it for future use. Happy loading!
Date published: 2016-03-16
  • 2016-05-03T14:47CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_LEE90177, PRD, sort_relevancy
  • clientName_natchezss
Questions